Categories
Advanced Networking

Broadway gateway protocol (lab 4)

  1. Configure IP address in interface
  2. Configure neighbour with ASN
  3. Inject the network
  4. Verify the configuration

ANSWERS

bgp

1)

Router 1:

R0(config)# int fa0/0

#ip address 192.168.1.254 255.255.255.0

#no shut

R0(config)# int serial2/0

# ip address 192.168.2.1 255.255.255.0

#no shut

Router 2:

R1(config)# int fa0/0

#ip address 192.168.3.254 255.255.255.0

#no shut

R1(config)# int serial2/0

# ip address 192.168.2.2 255.255.255.0

#no shut

 

2)

R0(config)# router bgp 1000

#neighbor 192.168.2.2 remote-as 2000

 

R1(config)# router bgp 2000

#neighbor 192.168.2.1 remote-as 1000

 

3)

R0(config)#router bgp 1000

#network 192.168.1.0 mask 255.255.255.0

#network 192.168.2.0 mask 255.255.255.0

 

R1(config)#router bgp 2000

#network 192.168.2.0 mask 255.255.255.0

#network 192.168.3.0 mask 255.255.255.0

 

4)

R0#sh bgp neighbor

R0#sh bgp summary

 

Note: System 1 we should assign as an address 192.168.1.1 and for system 2 192.168.3.1.

One reply on “Broadway gateway protocol (lab 4)”

Have you ever considered about adding a little bit more than just your articles?
I mean, what you say is important and all. Nevertheless think of if you added some great graphics or video clips to give your
posts more, “pop”! Your content is excellent but with images and
videos, this site could certainly be one of the most beneficial in its
niche. Amazing blog!

Comments are closed.