Categories
Advanced Networking

Remote access (lab 6)

Configure Telnet configure syslog.     Procedure: R0#config t R0(config)# int fa0/0 #ip address 192.168.1.254 255.255.255.0 #no shut   Pc1: 192.168.1.1 server: 192.168.1.100   Telnet r0(config)# line vty 0 15 #password den #login #exit   IN PC pc> telnet 192.168.1.254   IN Router router# ssh users     SysLOG ro(config)# logging on #logging 192.168.1.100 #logging […]

Categories
Advanced Networking

Frame Relay

configure ip address and hostname to all routers. configure the encapsulation type as frame relay ands lmi-type as cisco. configure dlci value from 100-110. write any five details and appropriate command of frame-relay.     Procedure 1) Ro(config)# int s2/0 #ip address 172.168.1.1 255.255.255.0 #no shut #int s3/0 #ip address 172.168.2.1 255.255.255.0 #no shut   […]

Categories
Advanced Networking

Point to point protocol(lab 7)

  1) configure the ip address on each interface. 2) configure hostname and encapsulation type as ppp. 3) configure username and password for each router and enable the authentication type as chap. 4) verify the configuration of ppp.     Procedure: 1) Router 1 Router(config) #int serial 2/0 #ip address 10.0.0.1 255.0.0.0 #no shut   […]

Categories
Advanced Networking

Redistribution (lab 3)

Questions configure EIGRP on R1,R2,R3. Configure OSPF on R3,R4 and R6. Redistribute EIGRP on OSPF network. Redistribute OSPF on EIGRP networks. Verify the redistribution and show the external networks in Routing tables   Procedure:       1) EIGRP R0: 1.0, 2.0 R1: 1.0,3.0 R2: 2.0,3.0   2) OSFP R2: 5.0, R3: 5.0,10.0 R4: 10.0 […]

Categories
Advanced Networking

RIP NG Configuration(Lab 5)

Questions Configure IPV6 address on all the active interfaces. Enable IPV6 unicast routing on all the routers. configure Riping and enable it on all the interfaces. verify the routing table & database.   Answers     1) Router 1: R0(config)# interface g0/0 # ipv6 address FEC0::12:1/112 #no shut R0(config)# interface g0/1 # ipv6 address FEC0::11:1/112 […]