Categories
Advanced Networking

RIP NG Configuration(Lab 5)

Questions

  1. Configure IPV6 address on all the active interfaces.
  2. Enable IPV6 unicast routing on all the routers.
  3. configure Riping and enable it on all the interfaces.
  4. verify the routing table & database.

 

Answers

 

RIPNG

 

1)

Router 1:

R0(config)# interface g0/0

# ipv6 address FEC0::12:1/112

#no shut

R0(config)# interface g0/1

# ipv6 address FEC0::11:1/112

#no shut

 

Router 2:

R1(config)# interface g0/0

# ipv6 address FEC0::12:2/112

#no shut

R1(config)# interface g0/1

# ipv6 address FEC0::13:1/112

#no shut

 

Router 3:

R2(config)# interface g0/0

# ipv6 address FEC0::11:2/112

#no shut

R2(config)# interface g0/1

# ipv6 address FEC0::13:2/112

#no shut

 

2)

R0(config)# ipv6 unicast-routing

R1(config)# ipv6 unicast-routing

R2(config)# ipv6 unicast-routing

 

3)

R0(config)#ipv6 router rip den

R0(config)# interface g0/0

# ipv6 rip den enable

 

R1(config)#ipv6 router rip den

R1(config)# interface g0/0

R1(config)# ipv6 rip den enable

 

R2(config)#ipv6 router rip den

R2(config)# interface g0/0

R2(config)# ipv6 rip den enable

 

4)

R0# show ipv6 route

R0#sh ipv6 rip database.

 

Note: This lab is down with the router 2911.